X-Tronic Model #3020-XTS Digital Display Soldering Iron Station Review

ByRichard William

If you want a best model of Soldering Iron Station, then you can check this one. Obviously X-Tronic Model #3020-XTS is a good one for all DIY expert. Again many one purchases it and reviewed that it is one of the best.  

After spending more than 7 days researching and testing, we took the plunge that the X-Tronic Model 3020-XTS LED Display Soldering Iron Station is the best for beginners and casual hobbyists. 

Buy On Amazon

X-Tronic's 3020-XTS Specifications

Maximum Power Output

75 Watts (15 Watts for Soldering Iron Mother Board/60 Watts for Soldering Iron)

Temperature Range

392°F to 896°F or 200°C to 480°C

Stability Of Temperature

±2°C (Static)

Temperature Of Operating

0°C to 40°C Or 32°F to104°F

Temperature Of Storage

-20°C to 80°C (-4°F to176°F)

Soldering Iron Cord

40 Inch Very Pliable Soldering Iron Cord (Virtually NO Memory)

Type of Power Cord

Power Cord: USA Type B – 3 Pin Grounded Plug – 15 Amp

Rated Voltage

AC 110V/60 Hz - NO 220V Available

X-Tronic's 3020-XTS Features

Safety Features

Anti-Statically Designed & ESD Safe

Celsius/Fahrenheit

Change from Celsius to Fahrenheit with with Flip of a Toggle Switch

Sleep Timer

10 Minutes

Digital LED Display

Bright Blue LED Display for Temperature • Very Visible

PID Technology

Proportional-Integral-Derivative Heating Technology often referred to as "Magic Temperature Compensation

Soldering Iron Holder

Chromed Spring Steel with "Bakelite" Polymer Insert • No Heat Transfer

The description of X-Tronic Model #3020-XTS Soldering Station

  • The X-Tronic Model 3020 Digital 75 Watt Soldering Station is a Powerful “Quick Temp” Unit and is manufactured for the Beginner as well as Expert Users and will Definitely Exceed Your Expectations with its Quality & Durability compared to any Soldering Iron Station in its Class. This Unit takes less than 30 Seconds to heat up from 200°C to 480°C (392°F to 896°F)
  • The Complete Kit Includes: 75-Watt X-Tronic model 3020-xts Soldering Station (60 Watts used for Soldering Iron &15 Watts used for Mini Mother Board in Soldering Iron) with 2 Helping Hands for Propping Up Smaller PCB’s right in front of the unit for you to work on along with a Side Mount Solder Roll Holder, Spring Style Soldering Iron Holder & a Brass Sponge Tip Cleaner with Supply of Cleaning Flux in the Tin plus a Wet Sponge.
  • Features: ESD Safe, 10 Minute Sleep Timer, Centigrade to Fahrenheit Toggle Switch, Blue LED Readout on Control Panel, PSD (Proportional-Integral-Derivative) Technology often referred to as Magic Temperature Compensation Technology, 40 Inch Very Pliable Soldering Iron Cord (Virtually No Memory) and a 55 Inch Power Cord from Wall Plug to Main Unit.
  • PLEASE NOTE: The Main (First) Photo shows the Brass Sponge Tip Cleaner with the soldering Flux In the Round Metal Tin Separately from the Soldering Station and also shows this same Container Mounted In the Main Unit - This is FOR PHOTO PURPOSES ONLY. There is "ONLY ONE" of these Containers that come with this Soldering Station.
  • ALL X-Tronic model 3020-xts Products come with a 30-Day Unconditional Money Back Guaranty which also includes a 3-Year Warranty with the Cost of Parts and Labor Included. PLEASE SCROLL DOWN THIS PAGE FOR MANY MORE PHOTOS & INFORMATION ON THIS PRODUCT!

Similar Posts

Echo CS-490 Chainsaw Review

Echo CS 490 Review

ByCharles Trantham

Echo CS 490 Chainsaw is designed to tackle the hardest tasks. Whether you are cutting firewood, felling a whole tree, or pruning limbs, all CS 490 chainsaws are made to offer prolonged, problem-free life. All users want a chainsaw that runs smooth, starts quickly and provides more years of reliable performance. Echo’s higher quality chainsaw…

intex 28635eg krystal clear cartridge filter pump

Intex 28635EG Krystal Clear Cartridge Filter Pump for Above Ground Pools, 1500 GPH Pump Flow Rate, 110-120V with GFCI

ByShalisha Wheeler

If you want to keep your pool water Krystal Clear and refreshing this summer then use this.  Because it has 1,500 GPH Filter Cartridge Pump! If you need to circulate and filter the water in your above ground pool to keep everything clean, refreshing and fun, you have to use a pump that have a…

Dremel 4300 Review

ByRichard William

The Dremel 4300 is a variable speed rotary device offers the most remarkable and versatile performance in all Dremel rotary tools. Extended engine quality and electronic input devices allow reliable performance at all speed levels. Dremel 4300 can take advantage of all existing Dremel rotary tools accessories and accessories, as well as elite accessories to…

Leave a Reply

Your email address will not be published. Required fields are marked *